Goodmans GSR75WDAB Portable Radio User Manual


 
Page 6
The GSR75WDAB can be powered either directly from the household 230V AC mains Supply via the
supplied lead or from 4 D size batteries (not Supplied)
AC MAINS
Insert the small end of the AC mains lead to the socket on the side of the GSR75WDAB and the 3 pin
plug into a switched household AC supply socket, ensure the wall outlet socket is switched ON. The
display will now illuminate indicating power is reaching the unit. Press the standby button to switch
the unit on.
Note: Whilst using the AC supply the battery supply is disconnected automatically.
BATTERY OPERATION
WARNING: Ensure that the battery charge switch located on the left side of the radio is switched
OFF. Charging of non re-chargeable batteries will damage the unit and may also result in the
batteries exploding.
Remove the Battery Compartment cover and insert 4 x LR20 (D Size Alkaline batteries), observing
the correct polarity replace the cover.
NOTE: BE SURE TO MATCH THE POLARITIES AS SHOWN BELOW.
NOTE: Old batteries may swell and leak. To avoid damage to the unit, remove the batteries when the
unit is to be stored for long periods of time, or if the batteries become exhausted (the display will fade
and the power/standby LED will flash if the batteries are becoming exhausted). And if radio sound is
low or distorted, the batteries probably need replacing.
Goodmans Product Information Helpline 0870 873 0080
Getting Started
Power Sources