Filter
Top Products
front of the time to indicate it is displaying overtime time.
Generally, word game tournaments allow 25 minutes per player. This corresponds to
PRESET 14. You need not worry about the DELAY feature, since selecting WORD
mode will eliminate the Chess DELAY feature.
Follow this procedure to set your clock for a Word game tournament:
1. Level GameTime’s™ PLUNGERS.
2. Slide the PAUSE/PLAY switch to PAUSE.
3. Reset GameTime™ by holding down the ON/OFF button on the underside of the
clock for a few seconds. Now release the button and press it again to turn
GameTime™ on.
4. Press the SELECT button to see the word PRESET on the display.
5. Use the + and – buttons to change the preset number to 14.
6. Press the SELECT button until you see the word WORD on the display.
7. Use the + button to select On.
8. Slide the PAUSE/PLAY switch to PLAY.
Playing the next game…and the next
When you are ready to play a new game, level the PLUNGERS. Press the ON/OFF
button on the underside of the clock for a couple of seconds until the display clears, and
then press the ON/OFF button again. The GameTime™ is already set to the last preset
time control you selected.
We are ready for a new game.
How about a nice game of Go?
Selecting a PRESET between 84 and 91 will cause the word GO to appear on the dis-
play. This is a constant reminder that GameTime™ is in Go mode. In Go mode, the
move counter will increment on each players turn.
Presets 84 to 87 use the Byo-Yomi overtime, and presets 88 to 91 use the Canadian
overtime.
7