Filter
Top Products
15
E4 WORLD RECORDER MANUAL
SETTING ALARM BY TURNING ON A RADIO
STATION continued
4. Press the volume buttons to set the desired volume at alarm time and
press ENTER or press ENTER if you choose to use the existing volume.
Note that the sleep timer appears in the display.
5. Use the numeric key to set the length of time that the alarm is acti-
vated, from 00-99 minutes, or press ENTER to use the existing time.
The display goes back to the normal clock display.
SETTING THE ALARM TO TURN ON A RADIO
STATION AND RECORD IT
1. Turn on the radio and select SD/MMC or ash memory to record to. See
the section titled SWITCH BETWEEN FLASH MEMORY AND SD/MMC
CARD, below.
2. With the radio turned off press ENTER, then press MW.
flashes in
the top of the display.
3. Enter the alarm time with the numeric keypad or press ENTER if you
wish to use the existing alarm time. The display shows the frequency.
4. Press FM, MW(AM) or SW and enter the frequency with the numeric
keypad and press ENTER or press ENTER if you wish to use the exist-
ing frequency. Note that the volume appears in the right side of the
display.
5. Press the volume buttons to set the desired volume at the alarm time
and press ENTER or press ENTER if you choose to use the existing
volume. Note that the sleep timer appears in the display.
6. Use the numeric key to set the time that the alarm is activated, from
00-99 minutes, or press ENTER to use the existing time. The display
goes back to the normal clock display, with
in the top of the display
indicating that the alarm is activated.