Emerson iC200 Clock Radio User Manual


 
29
NOTE: If the Power of this system is Onand the iPod function is
already selected then your iPod
®
will begin to play as soon as it is
connected to the dock, as long as the iPod
®
HOLD switch is Off. If your
iPod
®
enters the Pause mode when you connect it to the dock, press the
Play/pause button to begin playback.
7.) Once the iPod
®
is playing you can use the navigation controls on the iPod
®
to
select among the menu items as usual. However you can only adjust the
volume level by using the Volume +/– controls on the top panel or remote
control of this unit. The click wheel volume control on the iPod
®
cannot be
used to control the speaker volume level of this system.
8.) To skip or search forward or back to the next or previous song you can use
the Tuning/Skip or buttons on the top panel or the / buttons on
the remote control.
9.) The Play/pause buttons on the top panel of this system and the remote
control have the same function as the Play/Pause button on your iPod
®
.
Press once to begin playback. Press again to pause playback. Press and
hold to shut the iPod
®
Off’.
10.) When you have finished listening to your iPod
®
you may press the Function
button to switch to the TUNER function. Your iPod
®
will shut off automatically.
You may also press the Power button to shut this system Off . Your iPod
®
will shut off and the recharging circuit turns on automatically.
If you remove your iPod
®
from the docking connector we suggest that you
close the docking compartment cover again to keep dust and other foreign
objects out of the docking area.
NOTES:
If you remove your iPod
®
from the docking connector during playback the
power to this system is shut Offautomatically.
If you have a power failure while the iPod
®
is playing the iPod
®
power will
be shut off automatically to preserve the iPod
®
internal battery.
iC200_042007.p65 20/4/2007, 15:4329