Filter
Top Products
20
Listening To The Radio
1.) Press the Power button on the top panel or remote control to turn the system
‘ On. If necessary press the Function button on the top panel or remote control
to select the Tuner function.
The TUNER indicator appears and
the display changes from time to
radio frequency. The first time you
turn your unit ‘ On’ the display will
show FM 87.5 MHz.
2.) To switch between the FM and AM
bands press the Band button on
the top panel or remote control.
The first time you select the AM
band the display will show AM 520
KHz.
3.) Tune to the desired station with the Tuning/Skip or buttons on the top
panel or the / buttons on the remote control as follows:
• Manual Tuning
Repeatedly press either the Tuning/Skip or buttons on the top panel or
the / buttons on the remote control until the display shows the frequency
of the desired station.
• Automatic Tuning
Depress and hold either the Tuning/Skip or buttons on the top panel or
the / buttons on the remote control until the display begins to move and
then release the buttons. The tuner searches up or down the band for the next
strong station and then stops. Repeat this process until the tuner stops on the
desired station.
iC200_042007.p65 20/4/2007, 15:4320