Filter
Top Products
VS735 19
3. Installation Requirements
1 Install the unit within 30 degrees of the horizontal plane.
Max. 30˚
2 Use the enclosed screws for installation. Using other
screws can cause damage and void the warranty.
Chassis Chassis
Damage
Max. 8 mm (M5 screw)
4. Installing the VS735
Installing into a Universal In-Dash Mount (using the DIN
sleeve)
First, verify that the opening you will be mounting the VS735
into will accommodate the mounting sleeve.
Sleeve opening dimensions
Hole
7-3/16" (182 mm)
2-1/16" (53 mm)
Note:
• Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
1 Place the universal mounting sleeve into the instrument
panel opening. Ensure a tight fit.
2 Bend the tabs of the mounting sleeve inward as shown to
lock the sleeve into place.
3 Wire the power harness, make all connections to the
VS735 (see “Wiring the VS735”), and plug in the power
harness.
4 Gently insert the VS735 into the mounting sleeve until it
locks into place with a ‘click’.
5 Clip the trim ring into place.