Filter
Top Products
9
F. Loading and Playing a Disc
1. After connecting power to the unit, power on “DVD player” by holding down the
power button* for 2 seconds.
2. Open the disc door by pressing “PUSH OPEN”, place a disc into the tray with the
label side of the disc facing up.
3. Close the disc door cover of the tray. The unit will load the disc and go to the root
menu. Start playback by pressing, “PLAY”.
4. Rotate the VOLUME control to adjust the DVD player’s volume.
5. To stop playing a disc press STOP.
*NOTE: To turn off the unit, you must press and hold the power button for
2 seconds.
G. Connecting to a TV or another monitor ( Refer to Figure 4.-A &
Figure 4.-B )
You can also connect the DVD player to a TV or stereo system.
1. Connect one end of the Audio/Video cable’s (black 1/8” stereo plug) into the
unit’s DVD AUDIO jack, and connect the other end to the AUDIO INPUT jacks on
your TV or stereo (white = left channel, red = right channel).
2. Connect one end of the video cable (1/8 plug) into the units S video/video jack
and connect the other end to a video input on the TV or monitor.
3. Disconnect the A/V cables from the unit when you are using the DVD player on
its own.
Note: S VIDEO cable not provided with player; please consult the dealer for
purchasing it.