Filter
Top Products
36
Before doubting about troubles (vcp)
More indicators
flashing; unit will
not operate.
PLAY mode
indicated no audio
or video on to TV.
Poor video/snowy
picture or lines on
screen.
¥ Unit in emergency mode.
¥ VCP connected to TV A/V
Input jack.
TV in TV mode
¥ VCP connected by (75 OHM
coax) antenna coax to TV.
TV set in Òmonitor modeÓ.
¥ VCP connected to A/V
OUTPUT jacks of television
monitor instead of input.
¥ Output of VCP A/V RCA
cables or coax not
connected to TV input.
¥ Switchable input device
used between TV and VCP
(game prep).
¥ Poor connection between
VCP output and TV input.
¥ Reversed A/V inputs to TV.
¥ Shorted coax cable
between VCP and TV.
¥ Dirty heads.
¥ Contact dealer for service
to player.
¥ Switch TV to video mode
with remote control or
switch behind control door
of TV. Refer to your TV
OwnerÕs Manual for further
information.
¥ Switch to TV mode.
¥ Change connections from
A/V output to A/V input.
¥ Check connector between
VCP and TV.
¥ Verify proper bypass mode
for VCP pass-thru to
television monitor.
¥ Check connection(a).
¥ Check connection(b).
¥ Check cable/by pass or
continuity test.
¥ Clean head using tape
cartridge cleaner. We
recommend using cartridge
with cloth or paper tape
and cleaning drops
included. These are readily
available at retail stores.
SYMPTOMS CAUSE POSSIBLE SOLUTIONS