Filter
Top Products
19
VIDEO PLAYER OPERATION
¥ Press [PLAY] button for 2 seconds or [A.REPEAT] button in the
playback mode. The ÒA. RPTÓ lamp on the front panel will
illuminate. The VCP cycles through the following modes and the
ÒA. RPTÓ lamp lights green. The tape will play to the end, rewind
to the beginning and play again.
PLAYBACK ➠ THE END OF THE TAPE ➠ REWINDING ➠ PLAYBACK..
¥ Other controls have no effect during the Auto Repeat mode.
¥ To exit the Auto Repeat mode, press [PLAY] button for 2 seconds
or [A.REPEAT] button again. The ÒA. RPTÓ lamp will turn off and
stop the tape.
AUTO REPEAT PLAYBACK
Before you play a video cassette tape, be certain to read this
information on the proper care and use of video cassettes.
Only use video cassettes that bear the VHS mark:
$
Inserting video cassettes
Firmly insert the cassette into the cassette compartment with the
label up. An inverted cassette cannot be inserted.
Removing video cassettes
Press [EJECT] button and the VCP will eject the tape. Pull the
cassette out gently.
USING VIDEO CASSETTES
¥ Audio-visual material may include
copyrighted works which must not
be recorded without authorization
of the copyright owner.
¥ Do not insert fingers or any foreign
object beyond the door flaps of
the cassette compartment; this
could lead to injury or equipment
damage.
¥ Do not attempt to insert a video
cassette if the unit is not powered.
N
OTE
Video player operation