Filter
Top Products
36
APEX DIGITAL
AD-703
Function Settings
Continued
TV DISPLAY
1. 4:3/PS: Sets the television in normal aspect. PS stands for PAN SCAN which determines if the
DVD movie is in either widescreen or Fullscreen format. Most DVD movies today are recorded in
Widescreen format.This is selected when the unit is connected with a normal TV.
Wide-screen images are shown on the screen, but with some parts cut automatically.
2. 4:3/LB: Sets the movie in Letter Box format.
This is selected when the unit is connected with a normal TV.
Wide-screen images are shown on the screen, with black belt on the top and bottom.
3. 16:9 WIDE
This is selected when the unit is connected with a wide-screen TV.
TV TYPE
You may select according to the color system of the TV to be connected.
• Select “AUTO” for a multi-system TV.
• Select “NTSC” for a NTSC TV.
• Select “PAL” for a PAL TV.
ANGLE MARK
This only works when there is an angle mark ( ) on the disc.
• Select “ON”, the screen shows the mark when playing DVD and CD.
• Select “OFF”, the mark is not shown.
SPDIF OUTPUT
• SPDIF OFF: No signal is output from the coaxial port.
• SPDIF/RAW: Select this when the DVD player is connected with a receiver through coaxial port. When a
Dolby Digital disc, DTS disc or MPEG disc are played, the coaxial port will output in the corresponding digital
(Source code) format. The receiver to be connected must have Dolby Digital, DTS and MPEG decoding
processor.
• SPDIF/PCM: Select this when the DVD player is connected with a 2-channel digital mode or stereo receiver.
When a Dolby Digital or MPEG disc is played, the coaxial port will output in PCM 2-channel format.
CAPTION
• ON
The hidden subtitle is shown.
• OFF
The hidden subtitle is turned off.
MENU SETTING
Terms:
• PAL: is the color system used by other countries. Some DVD movies or VCD movies are recorded in this format.
• NTSC: is the color sytem used in North America and which should be used to view most DVD movies.
• AUTO: is a setting that will detect the proper setting of the movie.