Filter
Top Products
2.2 Basic Setup
2.2.1 Video Setup
This is guide for setting video output of Mpeg4 Player. You have to setup Mpeg4 Player’s video output mode same as
TV set’s video input mode.
9When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. “Mpeg4 Player” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output
signal is changed.
3. After you see normal screen, you have to save video configurations of Mpeg4 Player.
TV Video
Input Mode
Mpeg4 Player Video
Output Mode
Connection Jack
of TV, Mpeg4 Player
Video Cable Type
TV Out: NTSC C/S-Video
(HD Component OFF)
Normal Video
TV Out: PAL C/S-Video
(HD Component OFF)
CVBS or Composite Jack
(Generally Yellow Jack)
Supplied AV Cable
Not supported
S-Video
Not supported
- -
TV Out: NTSC C/YPbPr
(HD Component OFF)
Component 480i
TV Out: PAL C/YPbPr
(HD Component OFF)
Component 480p HD Component Out On 480p
Component 720p HD Component Out On 720p
Component 1080i HD Component Out On 1080i
Component 3 Jack
* Y(Green), Pb(Blue), Pr(Red)
Supplied Component Cable
* Y(Green), Pb(Blue), Pr(Red)
9NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.
19