Filter
Top Products
1.3.3 Windows 2000, XP
1) After connecting Mpeg4 Player, windows itself will
install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control
panel > (switch to classic View on Windows XP) >
system > Hardware > Device manager > Universal
Serial Bus controllers > USB Mass Storage Device ].
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
9When you see ‘Non High-Speed USB Hub Message’
The message will be displayed On windows XP when
you plug Mpeg4 Player into USB 1.1 spec. Host adapter.
9If new volume is not be appeared, check HDD format
or not. and HDD file system. Windows 2000, XP detect
both FAT32 and NTFS file system. Or connect power
cable of Mpeg4 Player.
15