AL Tech Portable MPEG Player MP3 Player User Manual


 
1.3 Copy Data via USB 1.3 Copy Data via USB
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of Mpeg4
Player via USB. It is possible to play media files at the hard disk on TV set.
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of Mpeg4
Player via USB. It is possible to play media files at the hard disk on TV set.
* If not detected when connecting PC, recommend to connect power cable of Mpeg4 Player. * If not detected when connecting PC, recommend to connect power cable of Mpeg4 Player.
1.3.1 Windows 98SE 1.3.1 Windows 98SE
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD > Windows 98
Driver Directory. After finishing installation, Connect Mpeg4 Player to PC via USB cable. If not detected, plug power cable of
Mpeg4 Player.
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD > Windows 98
Driver Directory. After finishing installation, Connect Mpeg4 Player to PC via USB cable. If not detected, plug power cable of
Mpeg4 Player.
1) After installing the driver, connect Mpeg4 Player.
And then, check the driver installation at Windows
[StartSettingsControl PanelSystem Device
ManagerHard disk controllersHi-Speed USB-IDE
Bridge Controller].
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
9If a new volume is not be appeared, check HDD format or
not, and HDD file system. Windows 98SE only detect FAT32
file system. Or connect power cable of Mpeg4 Player.
13