1.3.2 Windows ME
1) After connecting Mpeg4 Player, windows itself will
install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control
Panel > (view all Control Panel options) > System >
Device Manager > Universal Serial Bus controllers >
USB Mass Storage Device]
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
9If a new volume is not be appeared, check HDD format
or not, and HDD file system. Windows ME only detect
FAT32 file system. Or connect power cable of Mpeg4
Pla
e
.
14
