Filter
Top Products
2
1
B
@
a
CSD-.ES77O
II PAUSE DIR
1
4
A,J,&, ,,
WW4D
l+El
CSD-ES5701ES370
II PAUSE I
4
A
U=IHW4
k
4
CSD-ES7701ES570
1
2
FUNCTION
‘~
CD
:RADIO
0
TAPE
@TANDBY
lmw
CSD-ES770
4
CSD-ES770
PLAY REC
CSD-ES5701ES370
34
E =4
REVERSE
MODE
PLAY REC
5
PLAYIPAUSE
77
PIID
RECORDINGFROMA COMPACT
DISC
Recording is done on the side facing the cassette holder.
Use type I (normal) tapes.
1
2
3
4
5
Insert a cassette.
@
The side to be recorded on
Set the FUNCTION switch to CD.
For CSD-ES770, make sure that the 4 light of the OPE/BATT/DIR
indicator is on. If it is not on, press the DIR button to turn it on.
Place a disc with the label facing up.
Press the
● REC button to start recording.
The PLAY button is depressed automatically. -
The REVERSE MODE button is also depressed (CSD-ES770
only).
Press the E I I PLAY/PAUSE button to start CD play.
Basic operation
Press the following buttons.
To stop
■/= sTop/EJEcT button of the deck
■ STOP/MEMORY button of the CD player
To pause
II PAUSE button
Press again to resume recording.
After recording
Set the FUNCTION switch to POWER (!) STANDBY/TAPE.
Recording programmed tracks
1 Follow steps 1 to 6 on page 14.
2 Insert a cassette.
3 Press the
● REC button.
4 Press the -II PLAY/PAUSE button on the CD player.
Information on recording in general
When the. end of the tape is reached
CSD-ES770
The
● REC button is released and recording stops. But the +>
PLAY button is not released and the tape reverses. Press the
■/=
STOP/EJECT button to stop the tape.
To record on the other side, turn the cassette over.
CSD-ES5701ES370
Recording stops and the buttons are released.
To record on the other side, turn the cassette over.
Usable tapes
(-he
type I (normal) tapes. If you use type IV (metal) or type II (high/
CrOz) tapes, sound that has been already recorded may not be erased
completely.
● You cannot change the setting of the FUNCTION switch during
recording.
● If the erasure prevention tab on a cassette is broken off, the ● REC
button cannot be depressed.
. Adjusting the output volume and sound does not affect the recorded
sound.
● When recording near a television, noise may be recorded. Move the
unit further away from the television.
22