- 5 -
FACTORY DEFAULT SETTINGS
Password
The default setting for password has been left blank in the factory. Press Enter then you are
logged in for the first time. It is recommended that you set a password for security and
management purpose.
If you ever forget the password to log in, you can only reset the factory setting. Refer to the
next section titled “Factory Reset” for details.
Local and Global Port Addresses
The LAN parameters of the product are pre-set in the factory. The default values are shown
below.
Local Port Global Port
IP address 192.168.1.254
Subnet Mask 255.255.255.0
DHCP server function Enabled
DHCP client function is
enabled to automatically
get the Global port
configuration from ISP.
IP ADDRESSES FOR
DISTRIBUTION TO PCS
128 IP addresses continuing from 192.168.1.1through
192.168.1.128
Table 3: Local and Global Port Addresses
Information from ISP
If your IP address is provided dynamically by your ISP (Internet Service Provider), skip this
step. If you have a static address from your ISP, gather the information as illustrated in the
following table and keep it for reference.
IP address
ISP-assigning IP address Ex. 203.66.81.201
Subnet mask Ex. 255.255.255.0
Gateway Ex. 203.66.81.254
DNS server #1 Ex. 203.66.81.251
DNS server #2 Ex. 203.66.81.252
Table 4: Assigned Addresses
