- 23 -
command>release
Give up the obtained global port configuration
Note: if you choose NOT to obtain the global port configuration from your ISP, this command won’t be
executed and the following message will appear.
command>release
Works only if 'Obtain global port configuration from ISP' is enabled
renew
You must renew the global port configuration after you have released it. Otherwise the device
is disabled. The ‘Show’ command enables you to see the configuration. The device will not
work until you renew the global port configurations.
Example:
command>renew
Update global port configuration
(You can type 'Show' command to view the new configuration)
Note: If you choose NOT to obtain the global port configuration from your ISP,
this command won’t be executed and the following message will appear.
command>renew
Works only if 'Obtain global port configuration
from ISP' is enabled
user
Displays the current active users (up to 128 users).
Example:
command>user
IP address Node address Remainder time Host name
----------------+---------------+---------------+---------
192.168.10.1 0080-C8F8-8A64 5:47:17 Allen
192.168.10.2 0080-C8F8-8A64 expired Calvin
192.168.10.3 0080-C8F8-8A64 0:12:25 Edward
