- 8 -
Firmware Version: Read-only.
Device/Computer Name: For you to enter a descriptive name for identification purpose. Some
Internet Service Providers (ISP) requires this information. The Maximum input for this field is
20 alphanumeric characters and it is case sensitive.
Domain Name
2
:
For example: yourcompany.com. The maximum input for this field is 32 alphanumeric
characters and it is case insensitive.
PPPoE Enabled: If you are using PPPoE service, please check this box and enter the username
and password provided by your ISP.
PPPoE functions
?? Single Account Sharing: Multiple users can share one account.
?? Automatically connected to the Internet: Just launch your Internet program and the unit
will login and get on-line automatically.
?? Automatically disconnected from the Internet: This device will disconnect automatically
when it has been idle for a certain period of time.
Username: (for PPPoE)
?? Maximum input is 52 alphanumeric characters (case sensitive).
Password: (for PPPoE)
?? Maximum input is 36 alphanumeric characters (case sensitive).
Auto-disconnect…: This device can be configured to auto-disconnect when there is no
activity on the line for a certain period of time.
?? Default: 5 minutes. You can input any number from 0 to 65535.
?? To keep the line always connected, please set the number to 0.
Change Administrator Password: In this dialog box, you can set administrator’s password.
?? Maximum: 6 alphanumeric characters (case sensitive).
2
Your ISP may ask you to input a certain domain name. Domain name is also required for internal
network’s email and news functions.
