Black plate (13,1)
<YRD5055-A/U>13
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Playtime indicator
Shows the elapsed playing time of the cur-
rent track.
2 Track number indicator
Shows the track currently playing.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
# After a CD hasbeen inserted, press SOURCE
to select thebuilt-in CD player.
# You caneject a CD by pressingEJECT.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing andholding c
or d enablesyou to search every 10 tracksin the
current disc. (Refer to Selectingthe search meth-
od on page15.)
4 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CDplayer plays one standard,12-
cm or 8-cmCD at a time. Donot use an adap-
ter when playing 8-cmCDs.
! Do not insertanything other than aCD into
the CD loadingslot.
! If you cannot inserta disc completely orif
after you insert a discthe disc does not play,
check that thelabel side of the discis up.
Press EJECT to ejectthe disc, and checkthe
disc for damagebefore inserting it again.
! If an errormessage such as ERROR-11is dis-
played, refer toUnderstanding built-in CD
player error messages onpage 29.
! When a CD TEXT disc isinserted, the disc and
track titles beginto scroll to theleft auto-
matically.
Built-in CD Player
En
13
English
Section
05
