A SERVICE OF

logo

108108 109
Return to the Top page
Remote Controller Operation
Return to the Top page
Remote Controller Operation
Remote control
Thisunitcanbeoperatedusingtheremotecontrol.
ForDNX7330BT,DNX7330BTM,DNX5330BT,andDNX5330BTM,theremotecontrolissupplied
withtheunit.
ForDNX4330DABandDNX4330theremotecontrolistheoptionalaccessory(KCA-RCDV331).
2CAUTION
•Put the remote control in a place where it will not move during braking or other operations. A
dangerous situation could result, if the remote control falls down and gets wedged under the pedals
while driving.
•Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat
generation may result.
•Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause
the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately
rinse with water and consult a physician.
•Place the battery out of reach of children. In the unlikely event that a child swallows the battery,
immediately consult a physician.
Battery Installation
Iftheremotecontroloperatesonlyovershorterdistancesordoesnotoperateatall,itispossible
thatthebatteriesaredepleted.
Insuchinstances,replacethebothbatterieswithnewones.
1 Insert two “AAA”/“R03”-size batteries with the and poles aligned properly, following
the illustration inside the case.
Functions of the Remote control Buttons
Switching the operation mode
Thefunctionsoperatedfromtheremote
controldifferdependingonthepositionof
themodeswitch.
DVD
T V
NAV
AUD
AUD mode
Switchtothismodewhencontrollinga
selectedsourceortunersource,etc.
DVD mode
Switchtothismodewhenplayingadisc
mediaincludingDVD,VCD,andCD.
TV mode
SwitchtothismodewhencontrollingTV.
NAV mode
Switchtothismodewhencontrolling
navigationfunction.
NOTE
•Whencontrollingaplayerthatisnotintegratedin
theunit,select“AUD”mode.
Direct search mode
Usingtheremotecontrol,youcanjump
directlytothedesiredfile,trackchapter,etc.
withenteringthenumbercorrespondingto
thecontent.
NOTE
•ThisoperationcannotbeperformedforUSB
deviceandiPod.
1 Press the <#BS> button several times
until the desired content appears.
The available contents are different
depending on the source.
DVD
Title number/Chapter number/Play time/Item
number*
* You may not be able to use this function with
some discs or scenes.
VCD 1.X and 2.X (PBC OFF)
Track number
VCD 2.X (PBC ON)
Scene number/number
Music CD
Track number/Play time
Audio files
Folder number/File number
Radio
Frequency value
2 Enter the number of the content you
want to play using the numeric keypad.
3 For DVD or VCD, press the <ENTER>
button.
For music CD or audio files, press the
<POSITION> button.
For radio, press the <2> or <3> button.
The content you entered is played.