A SERVICE OF

logo

Open as PDF
next previous
8282 83
Return to the Top page
Setting Up
Return to the Top page
Setting Up
User interface
Youcansetupuserinterfaceparameters.
1 Touch [User Interface] in the list.
User Interface screen appears.
2 Set each item as follows.
Beep
Turnsthekeytouchtoneonoroff.
Defaultis“ON”.
Remote Sensor
Selectsaremotecontrolsignal.Defaultis“ON”.
Language
Selectthelanguageusedforthecontrol
screenandsettingitems.SeeLanguage setup
(P.83).
Text Scroll
Allowsscrollingoftextdisplayonthesource
controlscreen.Selectfrom“Auto”/”Once”/”OFF”.
Auto (Default):Scrollsthetextautomatically.
Once:
Allowsyoutoscrollthetextonlyonce
automaticallywhenupdated.
OFF:Doesnotscrollthetextautomatically.
Drawer Close
Setswhethertoclosethecommonmenu
(P.16)automatically.Defaultis“Auto”.
TEL Key Longer than 1 Second
Youcansettheoperationperformedwhen
theTELkeyispressedfor1second.Selectfrom
“Voice”/”V.OFF”/”R-CAM”.
Voice (Default):DisplaystheVoiceRecognition
screen.(P.82).
V.OFF:
Turnthedisplayoff.
R-CAM:
Switchestotherearviewcameravideo
display
.
Animation
Setswhethertodisplayanimation.Defaultis“ON”.
Secondary
Setswhethertodisplaythenavigation
informationintheaudioscreenorviceversa.
Defaultis“ON”.
Steering Remote Controller
Setsthedesiredfunctioninthesteeringremote
controller.SeeLearning function of steering
remote (P.83).
Travel Prayer for Safe Drive
(DNX7330BTM/ DNX5330BTM only）
Whenthisfunctionisset,theprayerfordriving
safetyisdisplayedwhentheunitisturnedon,
thenQuranisplayed.
SeeTravel Prayer for
Safe Drive Setting (P.84).
Language setup
1 Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2 Set each item as follows.
Select Mode
Selectsthemodetoselectalanguage.
Easy (Default):Selectsalanguageeasily.
Advanced:Allowsyoutoselectlanguagesfor
respectiveitems.*
Language Select
Selectsalanguage.
*Ifyouselect[Advanced]forSelectMode,
thefollowingscreenappears.
GUI Language Select:
Selectsthedisplaylanguageusedforthe
controlscreenandsoforth.
Navigation Language Select:
Selectsthelanguageusedfornavigation.
Text Language Select:
Selectsthelanguageusedfortagtext(song
information).
3 Touch [Enter].
NOTE
•Tocancelthelanguagesetup,touch[Cancel].
Learning function of steering remote
Thisfunctionisavailableonlywhenyour
vehicleisequippedwiththeelectrical
steeringremotecontroller.
Ifyoursteeringremotecontrollerisnot
compliant,learningmaynotbecompleted
anderrormessagemayappear.
1 Touch [SET] of [Steering Remote
Controller].
Steering Remote Controller Setting screen
appears.
2 Press the steering remote controller
button you want to set the function.
NOTE
•Youcanhavetheunitlearnedallbuttonsata
time.Inthatcase,presstheallbuttonsoneata
timeandafterpressingallofthem,touch[Done]
inSteeringRemoteControllerSettingscreen.
However,newfunctionscannotbelearnedafter
thisoperation.
3 Touch the function you want to set.
4 Repeat steps 2 and 3 as necessary.
5 Touch [Done].
NOTE
•Whenchangingthefunctionalreadylearned,
touchthebuttonyouwanttochangeinstep2
andthentouchtoselectthechangedfunction
fromthefunctionlist.
•Confirmthecontentsofthesettablefunctionon
thefunctionlist.Youcannoteditthefunctionlist.
•Toinitializethecontents,touch[Initialize]of
[SteeringRemoteController]inUserInterface
screen.Afteryoutouch[Initialize],aconfirmation
messageappears.Followthemessageand
completetheoperation.