Extech Instruments GX900 Manual

A SERVICE OF

next previous

ExtechInstruments

35 GX900-EU-EN V1.6 4/14



SETTINGTHEDATEANDTIME

Themeter’sinternalclockisusedfortime‐stampingandforgeneralinformational

purposes.Tochangethedateandtime,aswellasthedisplayformat,presstheF4

key(SETUP)andthenfollowthestepsbelow:

1. PositionthemenuselectornexttotheitemlabeledDISPLAYandpressOK.



2. PositionthemenuselectornexttotheitemDATE/TIMEandpresstheOKkey.

3. PositionthemenuselectornexttoeithertheSETDATEortheSETTIMEitem

andthepresstheOKkey.

4. Using the left and right arrows position the cursor on the date

or time

elementtoadjustit.

5. Usetheupanddownarrowstochangetheselecteddateortimevalues.

6. PresstheF1key(OK)tocompleteandconfirmtheactions.



AUTOMATICPOWEROFF

1. OpentheSetupmenubypressingtheF4Key(SETUP).

2. PositionthemenuselectornexttoINSTRUMENTandpressOK.

3. PositionthemenuselectornexttoSETTINGSandpressOK.

4. PositionthemenuselectornexttotheitemlabeledPOWEROFFandpressOK.

5. Toset

theAutoPowerOFFtimeinterval,usetheupanddownarrowstoselect

thetimeinminutes(05to60).

6. Setthetimetozero(00)todisabletheAutoPowerOFFfeature.

7. PresstheF1key(OK)toconfirmtheselection.

8. Press theF4 key

(CANCEL)to return tothe normaloperating modewithout

savingtheedit.