112
112 | Maintaining and Transporting the Printer
Updating the Printer Driver Information
After the replacement operation, update the driver information using the
steps below.
• Mac OS X: Open EPSON Printer Utility2 in your Applications
folder. Select
SPro 4880, and click OK. Click the EPSON
StatusMonitor
button and make sure the Matte Black cartridge option
is shown. If not, click
Update.
• Windows Vista: Click , click Control Panel, and click Printer
under
Hardware and Sound. Right-click your printer icon and select
Printing Preferences. Click the Main tab and make sure that the
correct ink cartridge is displayed. If not, set the information manually by
clicking the
Utility tab and then the Printer and Option Information
button.
• Windows XP: Click Start and select Control Panel. Double-click
Printers and Faxes. Right-click your printer icon and select Printing
Preferences. Click the Main tab and make sure that the correct ink
cartridge is displayed. If not, set the information manually by clicking
the
Utility tab and then the Printer and Option Information button.
Performing Additional Maintenance Tasks
In addition to running a power cleaning cycle and replacing the cutter blade,
you can use the Maintenance menu to set the printer’s date and time. You
can also use the maintenance mode to change printer defaults and run
special procedures.
Changing the Date and Time
Follow these steps to set the date and time:
1. Press the
Menu button.
2. Press the button until you see
MAINTENANCE, then press Menu
again.
3. Press the button until you see
CLOCK SETTING, then press Menu
.
