A SERVICE OF

logo

101
Maintaining and Transporting the Printer | 101
You see a screen like the following:
3. Click the
Nozzle Check icon.
4. Click
Print to print the nozzle check pattern.
5. Examine the nozzle check pattern to make sure it has no gaps or lines.
If the printout looks okay as shown below, you’re done. Click
Finish.
If you see any gaps as shown below, click Clean to clean the print
head and follow the on-screen instructions.
6. If the nozzles do not clear after a few cleaning cycles, run a Power
Cleaning Cycle, as described in the next section.