EPSON Imaging Technology Center Page: 32
Revision: 1 (Date: 6/20/00)
6.9 Set Resolution of Raster image “ESC (D nL nH rL rH v h”
Format:
ASCII ESC ( D nL nH rL rH v h
HEX 1B 28 44 nL nH rL rH v h
Decimal 27 40 68 nL nH rL rH v h
Range of Definition:
nL=04H, nH=00H
0 < v ≤127
0 < h ≤127
Function:
- Set resolution of raster image at (rHx256+rL)DPI.
- Set raster vertical direction resolution at v/(rH x 256 + rL) DPI
- Set raster horizontal direction resolution at h/(rH x 256 + rL) DPI
- This command is effective only for the graphic mode.
- The following tables are the combination of print density, command, and
parameter for Stylus Pro 7000.
- MicroWeave Function OFF
Parameters Note Print
density
(V x H)
v / r h / r
180x180 1/180 1/180
- Micro Weave Function ON
Print
density
Parameters Note
(V x H) v / r h / r
360x360 1/360 1/360
360x720 1/360 1/720
720x720 1/720 1/720
720x1440 1/720 1/1440
Initial State: The resolution for both Raster vertical direction and raster horizontal direction is
360 dpi.
