EPSON Imaging Technology Center Page: 28
Revision: 1 (Date: 6/20/00)
6.6 Select Dot Size “ESC ( e nL nH m d”
Format:
ASCII ESC ( e nL nH m d
Hex 1B 28 65 02 00 m d
Decimal 27 40 101 02 00 m d
Range of Definition:
nL = 02H, nH= 00H
m = 00H, d = 00H, 01H, 02H, 03H, 04H
Function:
- The value of d specifies the Dot Size.
d Dot Size
00H: Default*
01H: dot size 1 Micro dot
02H: dot size 2 Normal dot (Single)
03H: dot size 3 Normal x 2 (Double)
* Dot selection Normal (Single or Double) is performed automatically
depending upon the chosen resolution.
- Dot control is effective regardless of the printing mode and printing density.
- If the dot size is changed in the middle of the page, the operation is not
guaranteed.
- m is the parameter to extend functions, it is fixed with 0.
- If n has a value not specified above, this command is ignored.
Initial State: Default
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
The default is specified by the ESC @ command.
The default is specified by the ESC (G command.
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
None
