R4C3430
Rev. C
A5 size COVER2.FM
3/23/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
Control Panel Buttons and Lights
n = On
f = Flashing
o = Off
Tear Off/Bin button
● Advances continuous paper to the
tear-off position.
● Feeds continuous paper backward
from the tear-off position to the top-of-
form position.
● Selects a cut-sheet feeder bin when the
cut-sheet feeder is installed.
● Turns on the card mode to print on
postcards and envelopes. See
Chapter 3.
Tear Off/Bin lights
●
f f
when continuous paper is in the
tear-off position.
●
o n
when bin 1 of the optional cut-
sheet feeder is selected.
●
n o
when bin 2 of the optional cut-
sheet feeder is selected.
●
n n
when the printer is in the card
mode.
*Micro Adjust mode
When you hold down the Pause button for three
seconds, the printer enters the micro adjust mode. In
this mode, you can press the LF/FF
D
and Load/Eject
U
buttons to adjust the top-of-form or tear-off position.
See Chapter 2.
Load/Eject button
● Loads a single sheet of
paper.
● Ejects a single sheet of
paper if a sheet is
loaded.
● Loads continuous paper
from the standby
position.
● Feeds continuous paper
backward to the
standby position in
micro adjust mode.
Font button
Selects the font.
See Chapter 5.
Font lights
Indicate which
font is selected.
Paper Out light
● On when no paper is
loaded in the selected
paper source or paper
is not loaded correctly.
● Flashes when paper
has not been fully
ejected or a paper jam
has occurred.
Operate button
Turns the printer on
and off. The printer
is off when the top
of this button is
even with the
button protectors.
Pause button
● Stops printing
temporarily, and
resumes printing when
pressed again. When
pressed for 3 seconds,
turns on the *micro
adjust mode. To turn
off, press again.
Pause light
● On when the printer is
LF/FF button
● Feeds paper line by
line when pressing
shortly.
● Ejects a single sheet
or advances
continuous paper to
the next top-of-form
position when held
down.
Panel.eps
Pitch button
Selects the font size.
See Chapter 5.
Pitch lights
Indicate what font
size is selected.
