Epson FX-980 Manual

A SERVICE OF

next previous

A

Enhancing Your Printer With Options A-9

R4C3430

Rev. C

A5 size APPA.FM

3/23/99 Pass 0

R

Proof Sign-off:

<Crestec> _______

<Yamanouchi> _______

<Crestec> _______

11. Move the cut-sheet feeder’s paper selection lever to the single-sheet

position, as shown below. Then lift up the center support and close the

paper guide cover.

Note:

❏

Always close the printer cover before printing. The printer does not print when

the cover is open.

❏

When the cut-sheet feeder is installed, you can still load single sheets one at a

time using the front paper slot.

The cut-sheet feeder automatically loads paper when the printer receives

data. Printed pages are stacked on the center support. If you need to eject a

sheet, press the

Load/Eject

button.

If the first printed line on your page appears too high or low, you can adjust

its position using the micro adjust feature. See “Adjusting the Top-of-Form

Position” on page 2-39.

c

Caution:

Never use the knob to adjust the top-of-form position; this may damage the

printer or cause it to lose the top-of-form position.

4-4b.eps