Epson FX-980 Manual

A SERVICE OF

next previous

A-14 Enhancing Your Printer With Options

R4C3430

Rev. C

A5 size APPA.FM

3/23/99 Pass 0

L

Proof Sign-off:

<Crestec> _______

<Yamanouchi> _______

<Crestec> _______

To remove the roll paper holder, carefully lift up the printer and pull out the

roll paper holder from beneath the printer.

Loading roll paper

After you install the roll paper holder, follow the steps below to load a roll

of paper,

1. Make sure the printer is turned off. Open the paper guide cover and

remove the paper guide base.

2. Make sure the paper tension unit is installed.

3. Set the paper thickness lever (located under the printer cover) to the

proper position for the thickness of your roll paper.

4. Set the paper release lever to the single-sheet position.

5. Cut the leading edge of the roll paper straight across.

6. Insert the roll paper holder shaft into the center of the paper roll as

shown.

G3-31-2.eps

G3-32-1.eps