Enterasys Networks 2S4082-25-SYS Manual

A SERVICE OF

next previous

The NAC Controller Initialization Procedure

6-14 Initializing the NAC Controller

Figure 6-19 Select the UTC/Local Hardware Clock Setting

Ifyoursystemhardwareclockissettolocaltime,gotoStep 14. Ifyoursystemhardwareclock

issettoUTC,gotoStep 15.

14. Ifyoursy stemhardwareclockissettolocal,thetimezoneconfigurationscreendisplaysas

displayedinFigure 6‐20.Selectthedesiredtimezoneand

clickOKtoproceed.

Figure 6-20 Timezone Configuraiton

15. AscreenappearsallowingyoutoenableanSNMPdaemon.TomonitortheNAC Controller

usingSNMPclickonYesasdisplayedinFigure 6‐21toproceed,otherwiseclickonNo.Ifyou

clickonNo,thedisplayperformssomeprocessingandreturnstothesystem

prompt.