A-1
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
APPENDIX
A
XECfgParm.dat File Parameters
This appendix describes the parameters found in the XECfgParm.dat file for the
Cisco PGW 2200 Softswitch software Release 9.x and how they are used by the media gateway
controller (MGC).
Understanding the XECfgParm.dat File Format
The XECfgParm.dat file contains system-wide as well as system tuning parameters. All fields in this file
are written in the parm = value format. It supports a hash mark (#) in the first column to denote the entire
line as a comment.
Parameters are prefixed with a quantifier to specify the domain of the parameter. An asterisk (*)
preceding the parameter indicates that the parameter setting should be used by the entire system. A
component name limits the scope to the specified component.
XECfgParm.dat parameters are arranged syntactically as follows:
facilityName.parameterName = parameterValue
Cisco PGW 2200 Softswitch XECfgParm.dat Files
Facility Names
The following facility names are valid:
• almM—Alarm Manager
• amDmpr—Alarm/Measurement Dumper
• cdrDmpr—CDR Dumper
• cfgM—Configuration Manager
• engine—Call processing engine
• foverd—Failover Daemon
• H.248—H.248
• ioChanCtl—Controls all channel controllers
• ioChanMgr—I/O Channel Managers
• ISDNBRI—ISDN BRI
