2-7
Cisco EnergyWise Configuration Guide
OL-19806-03
Chapter 2 Managing Multiple Entities
Examples
Verify the power levels:
Switch# energywise query importance 85 keyword Admin collect usage
EnergyWise query, timeout is 3 seconds:
Host Name Usage Level Imp
---- ---- ----- ----- ---
192.168.40.2 shipping.1 6.3 (W) 10 1
192.168.50.2 orders.1 10.3 (W) 10 1
192.168.60.3 pc.1 200.0 (W) 8 85
Queried: 3 Responded: 3 Time: 0.9 seconds
You can also use the show energywise usage privileged EXEC command on Switch 1 and Switch 2
to verify the power levels.
Setting the Time-Out Value
When you use the default timeout value with the energywise query importance importance {keywords
word,word, ... | name name} set level level timeout timeout command and you wait more than 6 seconds
to receive query results, you should increase the timeout value.
For example, if you set a timeout value of 60 seconds and you wait less than 60 seconds to receive query
results, the actual query time appears.
Switch# energywise query importance 90 name * set level 0
EnergyWise query, timeout is 60 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!
Success rate is (48/48) setting entities
Switch# energywise query importance 90 name * collect usage
EnergyWise query, timeout is 60 seconds:
Host Name Usage Level Imp
---- ---- ----- ----- ---
....
Queried: 48 Responded: 48 Time: 45 seconds
