1-18
Cisco EnergyWise Configuration Guide
OL-19806-03
Chapter 1 Managing Single Entities
Manually Managing Power
Configuring Entity Attributes
Beginning in privileged EXEC mode:
Step 5
show energywise
show energywise domain
Verifies your entries.
Step 6
copy running-config startup-config (Optional) Saves your entries in the configuration file.
Command Purpose
Command Purpose
Step 1
configure terminal Enters global configuration mode.
Step 2
energywise importance importance (Optional) Sets the importance.
The range is from 1 to 100. The default is 1.
Step 3
energywise keywords word,word,... (Optional) Assigns at least one keyword.
When assigning multiple keywords, separate the keywords with
commas, and do not use spaces between keywords.
• You can enter alphanumeric characters and symbols such as
#, (, $, !, and &.
• Do not enter an asterisk (*) or a blank space between the
characters or symbols.
By default, keywords are not defined.
Step 4
service password-encryption (Optional) Enables password encryption.
If youset a hidden password in Step 5 or Step 10, enter this
command.
Step 5
energywise management security
shared-secret [0 | 7] mgmt-password [port
tcp-port-number]
(Optional) Sets the management password on the switch that the
management station uses to communicate with the domain.
• (Optional) 0—Uses an unencrypted password.
• (Optional) 7—Uses a hidden password.
If you do not enter 0 or 7, the default is 0.
• For the mgmt-password
–
You can enter alphanumeric characters and symbols such
as #, (, $, !, and &.
–
Do not enter an asterisk (*) or a blank space between the
characters or symbols.
• port tcp-port-number—Specifies the TCP port for
management access. The range is from 1025 to 65535. The
default is 43440.
By default, the management password is not set.
