Send documentation comments to mdsfeedback-doc@cisco.com
Contents
ii
Cisco MDS 9200 Series Hardware Installation Guide
OL-17468-02
4-Port 10-Gbps Fibre Channel Switching Module 1-16
LEDs on the Generation 2 Switching Modules 1-17
32-Port 2-Gbps Fibre Channel Switching Module 1-17
16-Port 2-Gbps Fibre Channel Switching Module 1-18
Switching Module Features 1-19
LEDs on the Generation 1 Switching Module 1-20
Services Modules 1-21
18/4-Port Multiservice Module 1-21
18/4-Port Multiservice Federal Information Processing Standards Module 1-22
LEDs on the 18/4-Port Multiservice Module 1-23
14/2-Port Multiprotocol Services Module 1-23
LEDs on the 14/2-Port Multiprotocol Services Module 1-25
IP Storage Services Modules 1-25
LEDs on IP Storage Services Module 1-27
32-Port Fibre Channel Storage Services Module 1-27
LEDs on the Storage Services Module 1-29
32-Port Fibre Channel Advanced Services Module 1-29
LEDs on the Fibre Channel Advanced Services Module 1-31
Caching Services Module 1-31
LEDs on the Caching Services Module 1-34
Power Supplies 1-35
Fan Module 1-36
Supported Transceivers 1-36
X2 Fibre Channel Transceivers 1-37
Fibre Channel SFP Transceivers 1-37
Combination Fibre Channel/Gigabit Ethernet SFP Transceivers 1-37
CWDM Combination Fibre Channel/Gigabit Ethernet SFP Transceivers 1-38
Gigabit Ethernet SFP Transceivers 1-38
DWDM Fibre Channel SFP Transceivers 1-38
CHAPTER
2 Installing the Cisco MDS 9200 Series 2-1
Preinstallation 2-2
Installation Options 2-2
Installation Guidelines 2-3
Required Equipment 2-4
Unpacking and Inspecting the Switch 2-4
Installing the Chassis in a Cabinet or Rack 2-5
Installing the Switch in a Cabinet with Insufficient Front Clearance 2-11
Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings 2-12
