![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/8b/78baccd8-7c8f-48fa-a70a-0a0aa444663d/78baccd8-7c8f-48fa-a70a-0a0aa444663d-bg5f.png)
2-13
Cisco 7200 VXR Installation and Configuration Guide
OL-5013-09
Chapter 2 Preparing for Installation
Site Log
Site Log
A site log provides a historical record of all actions relevant to the Cisco 7200 VXR router operation and
maintenance. Keep your site log in a common place near the chassis where anyone who performs tasks
has access to it. Site log entries might include the following:
• Installation progress—Make a copy of the Cisco 7200 VXR Router Installation Checklist and insert
it into the site log. Make entries on this checklist as each procedure is completed.
• Upgrades, removal, and replacement procedures—Use the site log as a record of system
maintenance and expansion history. Each time a procedure is performed on the system, update the
site log to reflect the following:
–
Port adapters installed, removed, and replaced
–
I/O controller removed and replaced
–
Network processing engine or network services engine removed and replaced
–
Power supply removed or replaced
–
Chassis replaced
–
Configuration changed; port adapters moved
–
Software upgraded
–
Corrective maintenance procedures performed
–
Intermittent problems
–
Related comments
Tab le 2-3 Cisco 7200 VXR Component List
Component Description Received
Chassis Cisco 7204VXR or Cisco 7206VXR chassis configured with a
network processing engine or network services engine, I/O
controller, up to two AC or DC power supplies, up to four port
adapters for the 4-slot chassis or up to six port adapters for the 6-slot
chassis (blank port adapters should be installed in empty port
adapter slots), and up to two Flash Disks or PC cards or a
CompactFlash Disk.
Accessories:
• Rack-mount
and cable-
management
kit
1
• Power cables
• Documentation
1. The NPE-G1 and the NPE-G2 ship with an additional set of cable-management brackets.
The following accessories might arrive in separate shipping
containers:
Two rack-mount brackets, two cable-management brackets, eight
M4 x 8-mm Phillips flathead screws, and six 10-32 x 3/8-inch
slotted binderhead screws
Up to two power cables
If ordered, router hardware and software documentation set and the
Cisco Documentation DVD package
2
2. Titles and quantities of documents will vary. You must order the type and quantity of documentation sets when you order the
hardware.