Using a Connection Script 79
execution will abort. The maximum string length is 64 characters, and the
acceptable
second is between 1-60.
■ The End command completes your script. The last line of your script must
conclude with
end.
Using the Configuration
Buttons
To create a connection script using the configuration buttons, do the following.
1 From the Script Configuration page, click Begin.
The text begin is entered as the first line in the script window.
2 Click Delay to set a delay interval before executing the next line of the script.
The Delay dialog box opens.
3 Enter the amount of time in seconds that your script will wait before proceeding.
This delay interval is used to allow the remote server time to process your request.
Click OK when finished.
The text delay xx is entered in the script window.
4 Click Set Port.
The Data Bits dialog box opens.
5 Enter the number of Data Bits required by your service provider. Click OK when
finished.
The Parity dialog box opens.
6 Enter the Parity setting required by your service provider. Enter e if the remote
server requires Even parity, o if the remote server requires Odd parity, or n if the
remote server requires that parity be set to None. Click OK when finished.
The Stop Bits dialog box opens.
7 Enter 1 to set the stop bits to one, or enter 2 to set the stop bits to two, and then
click OK.
Note the results in the script window. For example, if you chose the default values
for the Begin, Delay and SetPort parameters, the following text will have been
automatically entered:
begin
delay 1
setport 8 n 1.
8 Click WaitFor.
The WaitFor dialog box opens.
9 Enter the string that the remote server will send as a request. An example might
be the word
Login: Click OK when finished.
10 Enter the maximum number of seconds to wait for the remote server to send the
connection request. Click OK when finished.
11 Click Transmit.
The Transmit dialog box opens.
Enter the text that you want to transmit to the remote server. An example might
be your username or password. Click OK when finished.
