Installing the Virtual FAX Modem 149
Configuring the LAN
Modem for use with the
Virtual Fax Modem
Once you have installed the Virtual Fax Modem application and the LAN Modem
COM port driver, you can further define the manner in which the Virtual Fax
Modem interacts with the LAN Modem. This is done via the Virtual Fax Modem
Parameters page.
To access the Virtual Fax Modem Parameters page, do the following.
1 From the LAN Modem main page, click the Advanced button.
The Advanced submenu opens.
2 Click the Virtual Fax Modem button.
3 The Virtual Fax Modem Parameters page opens, as shown in Figure 71.
Figure 71 Virtual Fax Modem Parameters Page
The following options are provided.
■ Enabled: Check this box to enable or disable the Virtual Fax Modem. By default
this field is set to Enabled.
■ Time Limit: This field is used to set the maximum time available for a Virtual Fax
Modem connection. Once this time limit has been reached, the connection will
be automatically dropped. Note that when the Virtual Fax Modem connection
is in use, no other calls can be placed or received on that telephone line. To
disable this feature, leave this field set the default value of 0. In this case,
Virtual Fax Modem calls will be dropped when the application using the
connection is terminated, or by manually disconnecting the call via the LAN
Modem’s Manual Call Control page.
