Open as PDF
Switching the SCART video out
(U.K., Europe, and Russia models
Select this setting to toggle the video signal output from
the AV terminal between CVBS (composite video) and
• Select [Scart Video Out] in [VIDEO] menu.
Select this to output composite video signals.
Select this to output RGB video signals.
This unit does not output S-video signal from the AV terminal.
Setting the HDMI video
You can adjust the resolution depending on the monitor
you are using. This function is only available when this
unit is connected to an HDMI-compatible component via
the HDMI jack.
This unit is compatible with the following video formats:
480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50
Hz, 60 Hz, and 1080p/50 Hz, 60 Hz.
• Select [HDMI Video] in [HDMI] menu.
Select this for 480/576 progressive-scan video.
Select this for 720 progressive-scan video.
Select this for 1080 interlaced-scan video.
Select this for 1080 progressive-scan video.
Select this to set this unit to the best resolution setting
automatically based on your monitor.
• When [TV Type] is set to [NTSC] or [PAL], video signals with
480p or 576p are output accordingly.
• While HDMI video signals are being output, component video
is fixed to interlaced video.
• For settings other than [Auto], make sure that the selected
resolution is supported by the HDMI-compatible monitor you
If the selected resolution is not supported, this setting is
automatically switched to the most appropriate resolution, and
the newly selected resolution is displayed in the top left corner
of the display and in the front panel display temporarily.
• When you select [1080p] and use an HDMI cable longer than
5 m (16 ft), the picture quality may decrease.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR VIDEO MONITOR COMPATIBILITY
WITH THIS MODEL 525P AND 625P DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE
This unit is compatible with the complete line of Yamaha
products, including the projectors DPX-1300, DPX-830 and
the plasma monitor PDM-4220.
HDMI setup menu
DVI Output Range
Select : Enter
01EN_DVD-S1800_U.book Page 36 Thursday, July 19, 2007 1:28 PM