Filter
Top Products
15
DVD BASIC OPERATION
Slide the POWER switch to the ON position.
1
PLAYBACK OF A DVD
Press the Door OPEN button to open the disc tray. Insert a
disc with the label side facing up onto the disc tray.
2
Close the disc tray. After loading, the menu screen of the
DVD should appear. Use the Navigation buttons 1 to select
the desired option and press the ENTER button
2 to select it.
1
2
3
To stop playback, press the Stop (■) button 1. Because the
unit will remember where you stopped, simply press the
Play (
®) button 2 to resume playback where you left off
(resuming playback).
If the Stop (■) button 1 is pressed twice, the unit will stop
completely.
1
2
4
NOTES:
• If a MENU appears on the display screen, press the Navigation buttons to select the desired option/item, then press
the ENTER button. Please make sure to refer to the disc’s jacket or case for additional information.
•
Resuming playback may not work on all discs.
IMPORTANT NOTES:
•
Mickey’
s hand will appear at the top right of the display screen during operation if you try to access a function that is
not available on the disc.
• Some discs may take a few seconds to load.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title
side facing up, align it with the guides and place it in its proper position.
•
It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD
player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so
they are not explained in this owner’
s manual.
• If there is no picture on the display screen, but the POWER switch is in the ON position, the unit may be in the
Standby mode. See Standby function’
s information on the bottom of the previous page.