Filter
Top Products
UNIDEN Model uh015sx UHF CB Radio
Mounting Options
The radio can be mounted complete - or - with the Display Unit remote of the
Transceiver.
Mounting the complete radio (Transceiver with Display Unit)
a) Plug in display cable from the
Display Unit to the transceiver.
b) Hinge the Display Unit into the
transceiver as shown in the
diagram, then snap closed.
c) Should you wish, at a later stage,
to position the Display Unit
remote from the Transceiver,
release the Display Unit by
pushing up the slide on the side.
Remote mounting of the Transceiver Unit
If the Display Unit is not already
separate of the Transceiver then
remove it as detailed in c) above.
Fix the Transceiver Mounting Bracket
in an appropriate location (screws
and washers supplied). Then fix the
Transceiver in the bracket using the
Knob bolts supplied d).
The bracket can be fixed on the top
or under the transceiver. An arced
slot e) allows you to mount the
transceiver at an angle.
Changing Remote Extension Cable
At the back of the Display Unit
unscrew the cable cover A) and
release bracket B).
Unplug the short cable C) and plug in
the extension cable.
Replace bracket B) over the cable.
Then replace back cover A) and
screw in place.
7