Filter
Top Products
UNIDEN Model uh015sx UHF CB Radio
30
3. When finished, press /ENTER to store. Three successive beeps are heard.
4. Press /ENTER for 2 seconds to exit. The radio returns to normal
operation.
-or-
Turn the Channel Selector to go to the next programmable parameter.
Lead-in Tone
The Lead-in Tone, when programmed, ‘rides’ on the Lead-in Delay.
Hence, when transmitting a Selcall ID, a continuous tone will be heard for the duration
of the Lead-in Delay.
The main purpose of the Lead-in Tone is to increase the probability of contact between
your unit and another radio when TSQ Scanning.
1. Press and hold then turn power on.
Rotate the Channel Selector until is displayed.
Tone _ 1 is the factory default setting of the uh015sx for Lead-in Tone.
2. Press /ENTER and Lead-in Tone Editing is possible.
Use the Channel Selector to change the Lead-in Tone value.
Selcall ID
MENU
MENU
MENU
MENU