Filter
Top Products
UNIDEN Model uh015sx UHF CB Radio
Operation
14
60 RX Channels
The uh015sx has 60 receive only channels (CH41 to CH100) which can be
programmed with frequencies ranging from 400-512MHz (in 12.5kHz steps).
If you know the frequency you may store it manually or you may copy a Police
frequency to a channel or you may use the search function to find an active frequency
and copy it to a channel.
Manual Programming
Turn power off. Press and
hold while turning
power back on.
The channel indicator flashes
the lowest available empty
channel. You may use
the rotary knob to select
another channel.
Press . The first digit of the frequency indicator flashes. Turn rotary knob to
select first digit. Press or to move left or right between digit positions
and turn rotary knob to change digits.
When finished press /ENTER, the channel indictor flashes. Turn rotary knob to
select next channel for programming or press and hold /ENTER to store setting.
A confirmation tone sounds. The channel is also entered into OS scan memory.
Deleting a programmed RX Channel frequency:
Follow the steps in Manual Programming to enter a frequency for a desired channel.
Select 0 for the first frequency digit and then press /ENTER. Turn rotary knob to
select another channel or press and hold /ENTER to exit programming
mode.
Copying a Police frequency to a RX Channel
Select the Police channels group by
pressing then select a desired
frequency using the rotary knob.
Press and hold . The lowest
available empty channel will appear,
alternating with the selected Police
frequency. You may change the channel
using the rotary knob if you desire.
Press /ENTER to store the
frequency to the channel.
The new setting is stored and the
uh015sx returns to Police CH.
MENU
POL
MON
MENU
MENU
POL
MENU
SCAN
MENU
MENU
ENTER
SCAN
OS/GS
SRCH
BAND/TSQ
MON
SQL
HOLD
DCS/CTCSS
POL
MEM
MENU
ENTER
SCAN
OS/GS
SRCH
BAND/TSQ
MON
SQL
HOLD
DCS/CTCSS
POL
MEM
MENU
MENU