Filter
Top Products
UNIDEN Model uh015sx UHF CB Radio
Operation
12
Group Scan (GS) Mode
The GS scan memory is empty at factory setting. Channels and frequencies must be
memorized to GS scan memory for scan to work in GS mode (see p.13).
Allows you to monitor a Priority channel while scanning other channels in the GS
memory. The Priority channel is the same as the Instant Priority Channel, see p.16.
To monitor the Priority channel during GS the priority setting in the menu must be on.
Press 2 times. The priority icon and setting will flash. Turn rotary knob to select
on. Press and hold /ENTER to confirm. The PRI icon appears.
If the priority setting is not turned on, then GS can be used in the same way as OS.
To switch to GS Mode, press and hold
for 2 seconds. GS icon appears on the display.
GS Scanning checks the Instant Priority Channel for activity regularly.
If the Priority Channel becomes active the radio will stay on that channel for as long as
the signal is present. If the received signal ceases, Priority Scanning continues after 3
seconds.
If scanning stops on a channel
which is not a Priority
Channel, uh015sx will continue
monitoring the Priority
Channel for activity while listening
to the active one.
During Scan you may...
! Press to hold scan. Press again to resume scan.
! If scan stops on a frequency and you wish to continue then turn rotary channel
selector.
! The direction of scan can be changed using the rotary channel selector. .
! To remove an active channel from scan memory press and hold /MEM and
scan resumes.
! Press and hold /OS/GS for 2 seconds to switch between GS and OS modes.
To deactivate scan, press momentarily.
! When Scan is deactivated the starting channel will be reinstated.
! If scan is deactivated while on hold the hold channel will be reinstated.
MENU
MENU
POL
HOLD
MENU
ENTER
SCAN
OS/GS
SRCH
BAND/TSQ
MON
SQL
HOLD
DCS/CTCSS
POL
MEM
HOLD
SCAN
SCAN
SCAN