Transcend Information MP850 MP3 Player User Manual


 
11
Basic Operation
Charging the Battery
Plug the small end of the USB cable into the Mini USB port on the bottom of the MP850, and plug the large end
of the cable into an available USB port on your desktop or notebook computer. The MP850’s internal Li-ion
battery will automatically begin charging.
Figure 2: Connecting to a Computer
Power ON
Press and hold the button to turn on the player. An animated logo will appear, followed by the player
status information. After the startup sequence, the Main Menu will be displayed, indicating the MP850 is
ready for use.
ο
It takes a few seconds for the MP850 to power up.
ο
If the Hold icon appears on the display while powering on the unit, this means that the MP850’s
switch is enabled. You must switch off the Hold mode before you can power on the player.
Power OFF
Press and hold the button to turn of MP850 f the 850.
ο
It takes a few seconds for the MP850 to completely power down.
ο
The power OFF animation will be displayed: