Filter
Top Products
32
Welcome
Getting Ready
Using the Product
Other Helpful Information
When charging of the gigabeat has started, the charging icon (orange)
is displayed on the display screen. When charging is completed, the charging
completion icon (green) is displayed on the display screen. If the screen
does not function in this way, see “Troubleshooting” ( p. 68).
The charging icon is not displayed when charging with a USB connection.
Pressing the POWER button during USB charging might not turn on the
power when the gigabeat has not been used for a long time or when the
battery is too weak to supply power. Cancel the USB connection, connect
the AC adapter, and then turn on the power.
The charge time will vary depending on the condition of the built-in battery,
ambient temperature, etc.
The charge may stop temporarily to limit the temperature increase in the
gigabeat.
Charge the built-in battery within the specified operating-temperature
range.
If the temperature is outside the specified range, the gigabeat may
not be charged. ( p. 69)
As the remaining battery power drops, the indication ( p. 26) will change in
the following sequence: ( → → → ). Recharge the gigabeat
when the remaining battery power becomes low.
will be displayed while the AC adapter is connected.
Charging the Built-in Battery (Continued from the previous page)
gigabeat F60_OP16-32(E)â¸î 05.4.15, 3:25 PM32