Filter
Top Products
7
Adjusting The Wake Up Times
Your Redi-Set clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake
two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times.
The initial default setting for Alarm 1 is 6:00 AM. The initial default setting for Alarm 2 is 7:00 AM.
The procedure for adjusting the wake-up times is the same for both Alarm 1 and Alarm 2.
1. Depress and hold either the ALARM 1 or ALARM 2 Setting Button. The display will change
from the correct time to the Alarm 1 or Alarm 2 default wake up time.
2. While holding the ALARM 1 or ALARM 2 Setting Button, depress either the SET “+” or “ – “
buttons to move the display back or forward to your desired wake-up time.
3. When the desired wake-up time appears on the display, release the SET “+” or “ – “ buttons.
Note: Be sure that you have set the wake-up time correctly by observing the AM indicator. If the AM indicator appears
the wake-up time is “AM”. If the AM indicator does not appear, the wake-up time is “PM”.
4.
When the desired wake-up time (AM or PM) appears on the display, release the ALARM 1 or ALARM 2 setting buttons.
Selecting The Alarm Mode
Your Redi-Set clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are:
• Everyday – the alarm will turn on all 7 days.
• Weekdays only – the alarm will only turn on Monday through Friday.
• Weekends only – the alarm will only turn on Saturday and Sunday.
To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button. The display
will show the Alarm 1 wake-up time and the Day indicators will show you the alarm mode that is
selected.
• If all 7 Day indicators are ‘On’, the Everyday alarm mode is selected.
• If only the MON (Monday) through FRI (Friday) indicators are ‘On’, the Weekdays only mode is
selected.
• If only the SAT (Saturday) and SUN (Sunday) indicators are ‘On’, the Weekends only mode is
selected.
To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button and press the ALARM MODE (Display)
button until the Day indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation.
Release the ALARM MODE and ALARM 1 Setting buttons and the display will return to the correct time.
Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary.