Filter
Top Products
15
FM SETTINGS MENU
There are also some menu settings that are specic to FM
radio operation. These settings may be changed through the
Settings Menu.
To enter the FM Settings Menu:
Set to FM mode.•
Press the • MENU/ button on the front panel or the
MENU button on the remote control.
A map of the menu is shown below. To scroll through available
options, turn the VOLUME/SELECT control or press the M
button on the remote control. To choose an option from the
menu, press the SELECT/ENTER button.
MORE DETAIL OF THE FM SETTINGS MENU OPTIONS
SCAN SETTING: With this menu option you can set the
scanning sensitivity of the FM radio to two dierent levels-
‘Strong stations only’ or ‘All stations’. Setting to ‘Strong
stations only’ will exclude weaker stations resulting in a
quicker scan. If you set to ‘All stations’ the scan will stop at
every station detected, even if the signal is weak.
AUDIO SETTINGS: This option enables you to set the radio
to receive FM in Auto mode (Mono/Stereo) or in Mono only.
This may be useful if the signal is weak and the broadcast
is noisy.
FM SETTINGS MENU SLEEP FUNCTION
SLEEP TIMER
You can set the Sleep timer to play music for a set period
while you are falling asleep.
To set the sleep timer:
Play your choice of music.•
Press the • SLEEP button on the remote control repeatedly
to cycle through the sleep time options of 15 minutes,
30 minutes, 45 minutes, 60 minutes, 90 minutes or OFF
(sleep o).
Press the • SELECT/ENTER button to conrm the sleep
time.
The Sleep symbol will be displayed amd music will continue
to play for the time you selected, then the unit will set to
Standby.
NOTE:- Sleep time can also be set through the Settings Menu
if the remote control is not available.
HEADPHONES
There is a headphone output jack on the back panel of the
radio. If headphones are connected to this socket for private
listening, the speakers will cut out automatically.
FM DISPLAY MODES
FM DISPLAY MODE OPTIONS
The bottom line of the display can be switched to show
dierent items of information that may be transmitted with
an FM station.
To change the display mode:
Press the {/INFO button on the remote control repeatedly
to change the information displayed while playing an FM
radio station.
The full range of display options are shown below. Some
stations may not broadcast all of these options.