Filter
Top Products
12
SETTING THE ALARM TO WAKE YOU
To set the alarm to wake you:
Check that the Alarm 1 and/or Alarm 2 symbols are •
displayed as required. If not, set the Alarm(s) On as
described in the ‘Setting the Alarms’ section on the
previous page.
WAKING TO THE ALARMS
WHEN THE ALARM WAKES YOU
When the alarm sounds you can choose to set snooze, which
will reset the alarm for a further 9 minutes, or to switch it
o.
To set snooze:
To set snooze, press the • SNOOZE/DIMMER button when
the alarm sounds.
The alarm will stop and the alarm indicator and the snooze
time will count down on the display. After 9 minutes the alarm
will sound again.
To switch o the alarm:
To switch o the alarm, press the • MENU/ button or
the button on the remote control.
The unit will set to Standby.
ALARM REPEAT
CHECKING ALARM SETTINGS
You can step through the setting procedure without making
any changes to check the alarm settings.
To check the settings for Alarm 1 or 2:
Switch the radio on.•
Press the • ALARM1 (or ALARM 2) button.
Press the • SELECT/ENTER button repeatedly to step
through the settings and view them without making any
changes.
Continue to view the steps until ‘Alarm Saved’ is •
displayed.
Alarm 1 set
Alarm 2 set
If you have set either wake up mode to ‘iPod’, make sure •
that your iPod is docked.
Set the radio to Standby (or set the SLEEP function).•
The radio will switch o and the time and date will be displayed
with the Alarm Symbol(s).
The alarm(s) will repeat according to the Alarm Repeat
setting you made when setting the alarm.
Daily - The alarm will sound every day.•
Weekdays - The alarm will sound on weekdays, but not •
at weekends.
Weekends - The alarm will sound on weekends, but not •
on weekdays.
Once - The alarm will sound only once. If this setting has •
been chosen, an extra option is added for you to set the
date that you want the alarm to sound.