Filter
Top Products
7
The three symbols are shown below, indicating which alarm
is set.
Your radio includes a dual alarm function. The two alarms,
ALARM 1 and ALARM 2 can be set with dierent wake-up
times, then you can set either or both alarms to wake you. You
can also choose to be woken by a beep sound, a DAB station
preset or an FM station preset. Before using the alarms, you
must store your preferred wake-up settings.
STORING PREFERRED WAKE-UP SETTINGS:
Press and • hold the ALARM 1 or ALARM 2 button to
choose the alarm you want to set.
The display will conrm which alarm (ALARM 1 or ALARM 2)
you selected. The alarm time will be shown with the hours digits
ashing.
Turn the • VOLUME SELECT control to set the hours digits.
Press the • JOG MODE/SELECT button to conrm the hour
setting.
The minutes digits will ash.
Turn the • VOLUME SELECT control to set the minutes
digits.
Press the • JOG MODE/SELECT button to conrm the
minutes setting.
The display will now show a DAB preset number.
Turn the • VOLUME/SELECT control to choose a DAB preset
station to wake to.
Press the • JOG MODE/SELECT button to conrm.
The display will now show an FM preset number.
Turn the • VOLUME/SELECT control to choose an FM preset
station to wake to.
Press the • JOG MODE/SELECT button to conrm.
The display will now show a buzzer tone number.
Turn the • VOLUME/SELECT control to choose from buzzer
tone 1 or 2 for this alarm.
Press the • JOG MODE/SELECT button to conrm.
ALARM FUNCTIONS
If either of the alarms have been set to wake you, the ALARM
symbols will be shown on the display as shown below-
NOTE:- Refer to the previous page (STATION PRESETS) for
information on how to store preset stations. If you choose an
unassigned ‘free’ preset number in error, the alarm will default
to the BEEP wake-up setting.
The display will now show the legend ‘VOLUME’ .
Turn the • VOLUME/SELECT control to choose your
preferred wake-up volume.
Press the • JOG MODE/SELECT button to conrm the wake-
up volume setting.
NOTE:- Ensure that the wake-up volume settings are set at a
high enough level to wake you.
ACTIVATING THE ALARMS:
Once you have stored your preferred wake-up settings, you can
activate either or both of the alarms to wake you.
To activate your chosen alarm:
Press the • ALARM 1 or ALARM 2 button repeatedly to
cycle through the wake up options you can choose from
the list shown below-
Alarm symbol position
Snooze
symbol
Set the radio to Standby before going to sleep.•
NOTE:- The above examples show DAB Preset 3, FM Preset 1
and Buzzer Tone 1 as preferred wake-up settings.
WHEN THE ALARM SOUNDS
The alarm will continue to sound for one hour before switching
o automatically.
To switch o the alarm before this time
Press the • ALARM 1 or ALARM 2 button to switch o the
alarm that is sounding.
To extend the alarm for a further 5 minute ‘snooze’.
Press the • SNOOZE button to switch o the alarm that is
sounding.
The alarm will switch o for a 5 minute period, and the ‘Snooze’
symbol will show on the display to indicate ‘snooze’ mode.
Alarm 1 set Alarm 2 set Alarms 1 & 2 set
NOTE:- The snooze function can be selected repeatedly until
the alarm switches o after one hour.