Filter
Top Products
9
DAB DISPLAY MODES
When playing a DAB station you can change the information
on the display by changing the display mode.
To change the display mode from the default of
Scrolling station text information:
Press the • INFO button repeatedly to cycle through the
options listed in the chart below.
DISPLAY MODES
* Alarm 1 Status and Alarm 2 Status are only displayed for
the alarm(s) that are activated.
DLS (SCROLLING TEXT): This is a scrolling message giving real-
time information - song titles, news headlines, etc.
PROGRAMME TYPE: This describes (when available) the style
of the programme being broadcast.
MULTIPLEX NAME (GROUP NAME): is the name of the DAB
Multiplex that is currently tuned.
TIME & DATE: Shows the current time and date. Time and date
are updated by broadcasted information.
CHANNEL & FREQUENCY: The multiplex channel number and
frequency are displayed.
AUDIO BIT RATE: DAB allows broadcasters to vary the BIT RATE
(or the amount by which an audio signal can be compressed)
depending on the type of broadcast. This enables the amount
of stations on a multiplex to be maximised. Speech and News
are often broadcast at a lower Bit Rate; music needs a higher
Bit Rate for good delity.
SIGNAL STRENGTH: This bargraph indicates the quality of
the signal being received. The maximum signal strength
displayed is indicated by 8 bar segments.
In low signal areas, adjusting the aerial to increase the signal
strength indication will improve reception quality.
ALARM 1 STATUS: Briey displays the status of ALARM 1, then
returns to display scrolling text.
ALARM 2 STATUS: Displays the status of ALARM 2, then
returns to display scrolling text.
FM DISPLAY MODES
Pressing the INFO button repeatedly when in FM mode will
cycle the display through the available FM display options.
* Alarm 1 Status and Alarm 2 Status are only displayed for
the alarm(s) that are activated.
RDS (SCROLLING TEXT): This is a scrolling message giving
real-time information - song titles, news headlines, etc.
FREQUENCY: The station frequency is displayed.
PROGRAMME TYPE: This describes (when available) the style
of the programme being broadcast.
TIME & DATE: Shows the current time and date. Time and
date are updated by broadcasted information.
ALARM 1 STATUS: Briey displays the status of ALARM 1, then
returns to display scrolling text.
ALARM 2 STATUS: Displays the status of ALARM 2, then
returns to display scrolling text.